Abocom M73-APO08-420 User Manual

USB 10/100M FAST ETHERNET Quick Installation Guide M73-APO08-420

Adapter is found, it means that your device is properly installed and enabled. Installation for Windows 2000 1. Once the device is well connected to

2. Select Search for a suitable driver for my device (recommended) and click Next. 3. Insert the new device driver to the disk drive. Select Floppy d

7. Go to Start  Settings  Control Panel  Network and Dial-up Connections. Double-click Local Area Connections. 8. When the Network dialog bo

9. Remember to restart your computer to activate the new device. Setup Diagnostics To verify if the device exists in your computer and is enabled, go

3. Click Next to continue. 4. Click Next. Windows will copy all the necessary files to your system. - 12 -

5. Click Finish to complete the software installation. 6. When asked if you want to restart your computer, click No to continue the Network configur

click Add. Set the appropriate protocols and client for you needs. When completed, click OK. 9. Remember to restart your computer to activate the n

2. Insert the device Driver Disk into the floppy disk drive of your system. Select Search removable media (floppy, CD-ROM…) and click Next. 3. Cli

4. Windows will start searching for the appropriate driver for the installation. When the screen appears as below, click Continue Anyway to proceed

7. Go to Start  Settings  Control Panel  Network and Dial-up Connections. Double-click Local Area Connections. 8. When the Network dialog box a

REGULATORY STATEMENTS FCC Certification Part15, Class B The United States Federal Communication Commission (FCC) and the Canadian Department of Commun

click Install. Set the appropriate protocols and client for you needs. When completed, click OK. 9. Remember to restart your computer to activate the

INTRODUCTIONS The USB 10/100M Fast Ethernet Adapter provides outside-the-box plug-and-play local area network connections for USB-enabled PCs, noteboo

Parts Names and Functions  USB Connection Cable: connects the USB host port to the USB 10/100M Fast Ethernet Adapter. connects to the USB host port1

HARDWARE INSTALLATION Precaution Before the installation, make sure the USB port exists in your computer and is enabled. To check this, go to My Compu

2. Connect another end of the USB connection cable to the device port (USB B) of your USB 10/100M Fast Ethernet Adapter until it clicks. 3. Connect t

SOFTWARE INSTALLATION Installation for Windows 98 1. Once the device is properly connected to your computer, Windows 98 will automatically detect the

3. The installation program will proceed automatically. Follow the on-screen instruction to finish. 4. When Windows prompts you to restart your c

5. Go to Start  Settings  Control Panel. Double-click Network. 6. When the Network dialog box appears, select USB 10/100M Fast Ethernet and clic